News| 2022-08-29| admin
There are many installation methods for LCD splicing screens. According to different application places, different installation methods can be used. At present, the most common installation methods are the following four:
1. Floor cabinet installation
The floor -to -ceiling cabinet installation is made of full steel, computer ash appearance, plus static electricity protection, the entire system looks beautiful and atmospheric, and it is relatively simple if the system needs to move.
2. Wall -mounted bracket installation
The wall -mounted bracket installation is to fix the bracket on the wall with the expansion bolt, and then hang the stitching screen up. Just debug it. The installation is simple and fast. However, if the number of stitching screens is large, the wall may not be carried.
3. Embedded installation
The embedded installation is to dig out the space on the wall, and then use the screen to treat it. The advantage is that it can be better integrated with the surrounding environment, which can save more space.
4. Installation of landing brackets
The way of vertical bracket installation, the entire stitching screen system is supported by brackets, and the stitching bracket should support the weight of the entire system. This installation method requires the installation ground to be flat, the ground is strong enough, and the requirements for stitching brackets are relatively high, so that installation is conducive to system maintenance and fault maintenance.
There are two common maintenance methods of LCD splicing screens:
1. Pre -maintenance method
Previous maintenance generally takes off the screen in front of the big screen, and then maintains it; there are two types of electric and manual; the large screen installation of this maintenance method is very complicated, and it can only be stitched for two large screens (it is recommended to have the most recommended stitching (it is recommended to have the most most at the most. At the same time, because the amount of large screens should be removed from the front, it will lead to the inevitable increase of the large screen seams, which will affect the display effect to a certain extent.
2. Reserve the post -maintenance method of the maintenance channel later
Later maintenance refers to maintenance on the rear side of the large screen, and sufficient maintenance channels need to be left on the back of the screen. Generally, it takes about 70 cm to about 1 meter. Compressed visual space. Most of the projects now adopt post -maintenance methods.
Follow us